
E-15E-14
English
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 120W
Single channel, 4Ω, at 1kHz 240W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 270pF
Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB
Signal/Noise ratio (Awtd) 50W, ref. 5mV input 80dB
Overload margin, ref. 5mV at 1kHz 20dB
Inputs:
Nominal sensitivity 1V
Input impedance
10kΩ
Maximum input 4.6V
Frequency response 20Hz—20kHz ± 0.2dB
Signal/noise ratio (Awtd) 50W, ref. 1V input 105dB
Preamplier output
Nominal output level 900mV
Output impedance 240Ω
Headphone output
Maximum output level into 600Ω 4V
Output impedance 1Ω
Load range 16Ω—2kΩ
Accessory power output
2.1mm DC connector 6V, 500mA
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 100mm
Weight (net) 11.5kg
Weight (packed) 13.2kg
Supplied accessories Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE: All specication values are typical unless otherwise stated.
A39
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
product
guarantee
Correct disposal of this product
is marking indicates that this
product should not be disposed
with other household waste
throughout the EU.
To prevent possible harm to the
environment or human health from
uncontrolled waste disposal and to
conserve material resources, this product should be
recycled responsibly.
To dispose of your product, please use your local
return and collection systems or contact the retailer
where the product was purchased.
Worldwide Guarantee
is entitles you to have the unit repaired free of charge, during the rst two years aer
purchase, provided that it was originally purchased from an authorised Arcam dealer.
e Arcam dealer is responsible for all aer-sales service. e manufacturer can take no
responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or
through unauthorised adjustment and/or repair, neither can they accept responsibility
for damage or loss occurring during transit to or from the person claiming under the
guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date. Aer two years you must pay
for both parts and labour costs. e warranty does not cover transportation costs at any
time.
Claims under guarantee
is equipment should be packed in the original packing and returned to the dealer from
whom it was purchased. It should be sent carriage prepaid by a reputable carrier – not
by post. No responsibility can be accepted for the unit whilst in transit to the dealer or
distributor and customers are therefore advised to insure the unit against loss or damage
whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department, Unit 15, Pembroke Avenue, Waterbeach,
CAMBRIDGE, CB25 9QP, England or via www.arcam.co.uk.
Problems?
If your Arcam dealer is unable to answer any query regarding this or any other Arcam
product please contact Arcam Customer Support at the above address and we will do our
best to help you.
On-line registration
You can register your product on-line at www.arcam.co.uk.
Comentarios a estos manuales